Circular new type customized 1000w fans electric oven heating element
- Category: Home Heater Parts >>>
- Supplier: Danyang Feipeng Elecrtical Appliance Co. Ltd. [Jiangsu China]Danyang
Share on (60643974770):
Share on (60643974770):
The Heating Element, those metal components that get red-hot and generate heat, are the most important parts of any range. When the elements fail to heat properly, it's time to replace them. It's a simple procedure any electric stove owner can easily accomplish in a few minutes' time. You can usually identify a burnt-out element by blistering or small holes on the element's coils. A burner that plugs into a receptacle is easy to test, just unplug the non-heating burner, plug it into another working receptacle, restore the power to the range, and test it. If the burner works, you know its original receptacle is probably faulty. If it doesn't work in the good receptacle, the burner is bad and must be replaced. Do not be alarmed if a new element smokes a little when you first use it. This is a factory-applied green coating, that prevents scratches during shipment, burning away.
* Tube diameter: Φ6.5mm
* Tube Material: SS202, SS304, SS316, SS321 andINCOLOY800 etc
* Insulation Material: MgO
* Conductor Material: Nichrome Resistance Wire
* Wattage Density: High/Middle/Low (5-25w/cm2)
* Lead Connection Option: Threaded Stud Terminal or Lead Wire
* Lead Wire Type: 300mm Standard
* Water Deionized, Demineralized, Clean, Potable, Process
* Industrial Water Rinse Tanks
* Vapor Degreasers
* Hydraulic Oil, Crude, Asphalt
* Lubricating Oils at API Specified Watt Densities
* Air and Gas Flow
* Caustic Solutions
* Chemical Baths
* Process Air Equipment
* Boiler Equipment
1.Are you Manufacture or Trade Company?
A: We are Manufacture for Oven Heating Element.
2.Where is your factory located? How can I visit there?
A: Our factory is located in Houxiang Town, Danyang City, Jiangsu Province, China . You can take airplane to Shanghai, Nanjing or Changzhou.
3.What Certificate do you have?
A: We have CE, EMC, LVD, RoHS, ISO9001, VDE and so on.
4.How can I get some samples?
A: As usual, we send samples by freight collect.
5.How does your factory do regarding quality control?
A: We always attach great importance to quality controlling from the very beginning to the very end.
6. What is your MOQ?
A: 1000pcs for each item. If your quantity is less than 1000pcs, we also can send to you, but with different prices. We accept little trial order.
New products from manufacturers at wholesale prices
