Main technical performance Original Pressure Control 1-10Kgf/Cm2 Sns-C110X Working medium viscosity: ≤ 1 × 10-3m2 / S; Original Pressure Control 1-10Kgf/Cm2 Sns-C110X Enclosure protection class: IP65; Original Pressure Control 1-10Kgf/Cm2 Sns-C110X Ambient temperature: -10 ~ 40 ℃; Original Pressure Control 1-10Kgf/Cm2 Sns-C110X Medium temperature: 0 ~ 80 ℃; SOriginal Pressure Control 1-10Kgf/Cm2 Sns-C110XNS-C110X Anti-vibration performance: switching difference is fixed to max2g;
Repeatability: ± 1.6% FS; Original Pressure Control 1-10Kgf/Cm2 Sns-C110X Electrical parameters: AC220V 3A 100VA DC220V 3A 10W, switch contact form Original Pressure Control 1-10Kgf/Cm2 Sns-C110X Electrical lead interface: G1 / 2; Original Pressure Control 1-10Kgf/Cm2 Sns-C110X Pressure connection interface: internal thread ZG1 / 4. Original Pressure Control 1-10Kgf/Cm2 Sns-C110X Adjustment method
Original Pressure Control 1-10Kgf/Cm2 Sns-C110X
The instrument has the adjustment indication mechanism, the field adjustment is convenient, the scale indication precision is ± 4% FS, need precise control, may use the pressure checker to adjust. Original Pressure Control 1-10Kgf/Cm2 Sns-C110X Example: a lubricating equipment filter working pressure of 0.4MPa, when the filter pressure at both ends of more than 0.1MPa when the alarm signal. Can choose a PKC0.25A1M differential pressure controller, the upper switching value is set to 0.1MPa, normally open contact with electrical control circuit, high and low voltage interface, respectively, and the filter into and out of phase. The specific adjustment method is as follows: Original Pressure Control 1-10Kgf/Cm2 Sns-C110X 1 Connect the controller pressure input connector to the pressure calibrator, open the watch cover, and connect the multimeter or other pointing device to the terminal block. Original Pressure Control 1-10Kgf/Cm2 Sns-C110X 2 Press the high pressure side (+ mark) pressure up to 0.4MPa, and then raise the low pressure side (- mark) pressure to 0.4MPa, either at the same time. Original Pressure Control 1-10Kgf/Cm2 Sns-C110X 3 Loosen the lock nut, raise the pressure on the high pressure side and rotate the adjustment screw so that the switch contacts operate at 0.1MPa. Original Pressure Control 1-10Kgf/Cm2 Sns-C110X 4 will reduce the pressure on the high pressure side, so that when the differential pressure dropped to about 0.09MPa switch contact reset. Original Pressure Control 1-10Kgf/Cm2 Sns-C110X 5 Tighten the lock nut and adjust the calibrator pressure repeatedly until it meets the requirements. Original Pressure Control 1-10Kgf/Cm2 Sns-C110X Selection and installation Original Pressure Control 1-10Kgf/Cm2 Sns-C110X 1 set value is best located in the adjustment range of 20% to 80%. Original Pressure Control 1-10Kgf/Cm2 Sns-C110X 2 medium temperature is too high, in the pressure interface before the spiral cooling tube (order to be marked, I can be supporting the supply plant). Original Pressure Control 1-10Kgf/Cm2 Sns-C110X 3 when the medium viscosity should be added when the isolator (order to be marked, I can be supporting the supply plant). Original Pressure Control 1-10Kgf/Cm2 Sns-C110X
The above is a brief introduction to SAGINOMIYA Japan's Saginomiya, SAGINOMIYA Japan.
Original Pressure Control 1-10Kgf/Cm2 Sns-C110X
Original Pressure Control 1-10Kgf/Cm2 Sns-C110X
Original Pressure Control 1-10Kgf/Cm2 Sns-C110X
Original Pressure Control 1-10Kgf/Cm2 Sns-C110X
If have any request for the Original Pressure Control 1-10Kgf/Cm2 Sns-C110X ,please contact with me.
Original Pressure Control 1-10Kgf/Cm2 Sns-C110X
Original Pressure Control 1-10Kgf/Cm2 Sns-C110X
Payment
Original Pressure Control 1-10Kgf/Cm2 Sns-C110X
Payment term: T/T before shipment. SP Original Pressure Control 1-10Kgf/Cm2 Sns-C110X white color 1.3inch oled module We accept payment via the Paypal /Western union/TT, you can choose as you like.SP Original Pressure Control 1-10Kgf/Cm2 Sns-C110X white color 1.3inch oled module
7pin/4pin SPI/IIC I2C white color 1.3 inch oled module
Shipment term: Ship via DHL, FEDEX, UPS, EMS express, depends on customer's requirement.7pin/4pin SPI/IIC I2C white color 1.3 inch oled module
1.We will send the goods within 2 days after buyer's payment. 0 Original Pressure Control 1-10Kgf/Cm2 Sns-C110X 2.We will responsible for the China customs declaration and buyer should be responsible for th e destination customs declaration.7pin/4pin SPI/IIC I2C white color 1.3 inch oled module original 0.69 inch Original Pressure Control 1-10Kgf/Cm2 Sns-C110X 3.Express shipping usually take 3-5working days to reach your end depends on the country de liver to. We will provide the track number to you when we send the products out. white color 1.3inch oled module7pin/4pin SPI/IIC I2C white color 1.3 inch oled module
4.If any other shipping ways you preferred, please let us know and we will use your way if avail able. We will provide the track number to you also when we send the products out. white color 1.3inch oled module 5.Please double check the ADDRESS carefully when processing order. Original Pressure Control 1-10Kgf/Cm2 Sns-C110X white color 1.3inch oled module
7pin/4pin SPI/IIC I2C white color 1.3 inch oled module SPI Original Pressure Control 1-10Kgf/Cm2 Sns-C110X 7pin/4pin SPI/IIC I2C white color 1.3 inch oled module
Original Pressure Control 1-10Kgf/Cm2 Sns-C110X
Warranty
Original Pressure Control 1-10Kgf/Cm2 Sns-C110X
1.Our side always double check all the products before delivery to make sure correct.white color 1.3inch oled module 2.All components we sell has 30 days return policy from the day of shipment, but if the damag e is man-made, we will be unable to change for you.0 IIC Original Pressure Control 1-10Kgf/Cm2 Sns-C110X
