1Gallon Kit Epoxy Resin Clear Thin High Gloss High Impact for WoodTable Top Coating

Share on:

Price in USD:Details


Product Overview


Product Description

MTB-3309 High Gloss Crystal Clear Bar Table Top Epoxy Resin Coating For Wood Tabletop - 1 Gallon Kit

Commercial grade clear epoxy for countertops. Will not yellow, fade ,or crack. MTB-3309 Clear countertops epoxy produces a crystal clear coating on all types of surfaces .

Our Commercial-grade epoxy is engineered specifically for Bar Tops, Tabletops & Countertops.


UV Stable Crystal Clear Table Top System is a high performance two part epoxy resin  Clear epoxy system designed for Table Tops, Bars, Wood finishes, See-Through Encapsulations, clear epoxy resin for crafts, Art work, and other applications requiring a clear, strong, plastic coating specifically designed to resist Yellowing caused by the sun and other Ultra Violet light sources. 

This two part epoxy resin material has an easy to use 3 to 1 by volume mix ratio, wets out substrates well, maintains its integrity over sharp corners, it has excellent air release qualities and a relatively fast set time for an epoxy coating which may be accelerated by mild heat to 160F. 

Makes a great two part epoxy wood glue. While this material will do much better than competitors products for non-yellowing we still do not recommend it for permanent outdoor applications.


• 100% Solids

• Self Leveling, High Gloss

• U.V. Resistant Formula

• Excellent Air Release

• Excellent Color Stability

• Improved Impact Strength

• Improved Surface Appearance

• Early Development of Physical and Performance Properties

• Produces a Tough, High Gloss, Water Resistant Coating

• Eliminates Craters, Crawling and Fish Eyes

• Blush Resistant

Typical Application

Works On

Wood,Concrete,Granite,Cooper,Satinless Steel,Laminate,Cork,Formica,Quartz,Bamboo,Corian and ceramic tile.Our countertop top epoxy is the standard product to use for counters made of pennies,bottle capes,photos,stickers,and concert tickets.


Crystal Clear Epoxy

Unlike most epoxy resins,our unique blend of polycarbons produces a completely transparent dinish that will never yellow,fade or crack with time.It is a product you can trust.

Extremely Durable& Self-Leveling

MTB-3309 Clear Countertop epoxy self-levels to 1/8",creating a virtually indestructible surface. The result is a crystal clear, brilliant surface that accentuates the material below it. Truly beautiful to behold.

Scratch Resilient& Maintenance Free

MTB-3309 Clear countertop epoxy is specially formulated to resist scratching and provide long lasting maintenance free protection for your surface.

100% VOC Free

MTB-3309 Clear countertop epoxy is free from volatile organic compounds and is compliant with all environmental requirements implemented by international organizations such as the Environmental Protection Agency and the World Health Organization.

Easy Do it Yourself Once-Coat System

MTB-3309 Clear countertop epoxy self levels at 3mm(that is 1/8").That is twice thick as other countertop epoxy on the market. Our one coat epoxy system will save your time and money. Our simple 3-steps process(measure, mix and pour) is easy enough for anyone to do and the end result will be spectaculer! You do not have to be a professional to achieve a professional look. We provide easy to read instructions and videos that will show you exactly what to do.

Technical Data Sheet
Clear Liquid
Clear Liquid
Mix Ratio by weight
Operation Time(H)
Curing Time(H)
Cured Time(D)
Solid Content(%)
Levelling roperty(Grade)
Operation Method
Roller /Self-level
Coverage Data(@1mm)
Operation Temperature
Mixed Viscosity(Cps)
Compressive Strength (Mpa)
Wear resistance (mg)
Fineness (μm)
Shelf Life (M)
    16oz/unit,32oz/unit,1gallon/unit ,accept OEM&ODM
Using Steps

How to use MTB-3309 Ultra Clear Table Top Epoxy Coating /Extremely Durable Table Top Finish?

No experience needed.Get a beautiful crystal-clear surface in just a few easy steps.

Step 1: Measure Epoxy
MTB-3309 Clear Epoxy is a two-part, epoxy coating that is mixed at a 3 to 1 ratio. Pour an equal amount of hardener and resin into a new container. It is important that you use a new container for each batch that you mix so that the next batch does not get contaminated from the remnants of curing epoxy in the previous container.

Step 2: Mix Epoxy
Mix thoroughly with our mixing drill bit to ensure that the batch is completely blended.

Step 3: Paint on a Seal Coat of Epoxy
On porous material such as wood, you will need to paint on a seal coat of the same epoxy first to seal any pores in the surface. This prevents air bubbles from forming in the following flood coat. Not all surfaces require a seal coat. Contact customer service if you are unsure if your project will need a seal coat as you will need to figure the seal coat into your epoxy order to make sure you have enough product.

Step 4: Pour Epoxy Flood Coat
Pour the epoxy onto the surface working your way down the length of the area. The epoxy self levels so there is no need to move it around with any tools. The epoxy coat can be allowed to flow over the sides which will create a coating on the vertical edges. The epoxy that drips over will form bumps about 1/2 inch underneath the lip of the edge. These drips can be sanded off once the epoxy has cured.
*Multiple flood coats can be applied to cover over embedded objects. Just pour a new flood coat every 4 hours.

Step 5: Pop Air Bubbles with a Plumber's Torch or Heat Gun
Once you finish pouring the epoxy, you will need to pop air bubbles using a plumber's torch or a heat gun (not a hair dryer). This process is the easiest step as it only takes about 30 seconds to 1 minute to do. Keep the torch or heat gun a few inches from the surface and simply wave it back and forth until you cover the entire distance of the surface. The heat pops any bubbles instantly.

Finished Project 

The epoxy is dry to the touch in 12 hours. Allow 72 hours before using the surface. That's it!

Working Temperature of MTB-3309 Clear Ultra Clear Table Top Epoxy Coating /Extremely Durable Table Top Finish

The working room temperature must be above 75 degrees, several hours prior to mixing the epoxy. We recommend that the product be brought inside and acclimated to room temperature, as it will be cold during winter shipping months. Use space heaters if necessary to ensure the temperature remains above 75 degrees in cold areas, such as garages and basements. It is extremely important that the temperature remain above 75 degrees for a full 72 hours, in order for the epoxy to cure. High or low humidity and higher temperatures (75-110 degrees) are perfectly fine for curing; the epoxy cures much faster with higher temperatures.

Detailed Images
Packing & Delivery

MTB-3309 Clear Table Top Epoxy Coating

We have various types packages for you choice 





---In common ,it takes about 1-3 days to prepare the cargoes for you after you confirm the order.The exact time depends on your quantity.

0.0125 s.