Automatic tunnel car wash machine 7 brushes with dryer

Product Overview

Description

Automatic tunnel car wash machine 7 brushes with dryer

Introduction

   Selected Japanese Mitsubishi, Japanese Pro-face, French Schneider, Taiwan Airtac, Italian SEKO, Italian SITI and other international famous components.
  Reliable and stable performance, advanced self-check function to test the manual, automatic, motor, water spraying, wax spraying and other systems.

 

Tunnel type car washing machine

 

Equipment size Parameters
Length	Width	Height	Max car length	Max car width		Max car height		Application
7-14m	3.5-3.8m	2.95-3.1m	≥5.5m	≤2.15m		≤2.0m		Cars commercial and suv
Equipment can be professionally customized according to customer’s actual venue
Equipment operation parameters
Start up method	Installed capacity	Washing speed	Average water consumption(L/per car)		Power consumption		Control options	Power standards
Electronic inductive	15-33kw	1-2min/car	80-120(circulating water≤20)		0.3-0.7kw/car		Automatic /manual	380V/50Hz (Custom 220V)

 

 

Warranty:

We offer 18 months extended warranty for complete machine, all spare parts included.

Within 18 months:if any parts break down, we will compensate new parts at free charge,not including courier expense. Normally we will ask customers keep some spare parts in stock for machine maintenance, and the compensation spare parts will be sent together with next shipment or through a cheaper way but not by DHL.

More than 18 months:We provide online technical guidance and introduction to find broken part,and we will give you a favorable price,but need you bear shipping cost.

 

Maintenance

1. There is uneven foam spray on the car washing machine. It is maybe that the foam system fails. Check the key points: The air pressure of the car washing machine is too small or too large. You can try to adjust the air pressure adjusting device.

2. There may be an abnormality in the ratio of the car wash liquid, and the ratio of the car wash liquid can be adjusted.

3. If the foam pipe leaks or leaks, check that the pipe is secure and loose.

4. The shower head of the car washer stops rotating, check and clear the nozzle for clogging, and replace the damaged rotating device; the angle of the nozzle can be adjusted properly.

5, abnormal sound of the pump, there may be inhaled air, immediately check the tank for water, clean the filter to prevent clogging

6. If the pump's high-pressure water pressure is too low, adjust the valve's pressure, the tightness of the belt, and check if the valve needs to be replaced.

7. If the wheel of the car washing machine slips, check whether there is stuck, whether the bearing is in good condition, or if the chain is too tight or too loose, the vibration of the car washing machine will occur.

No water spray	Clogged nozzle	Clean nozzles
	Insufficient water in reservoir	Increase water volume
	Water pump overload and off line	Reconnect the wire
	Pump malfunction	Overhaul the pump
	Solenoid valve damage	Change new Solenoid valve
	Air in pump	Loosen the vent,exhaust the air
No stop water	Foreign matter in solenoid valve	Clean the solenoid valve