Hot Dip galvanized Chain is manufactured specifically for use in chain slings for lifting purposes. The chain is heat treated for tensile strength and resistance to wear whilst also allowing for shock absorption.
Work Load Limit (WLL) is the maximum load which the chains are designed to sustain in lifting use. The mean stress at this load is 200n/mm2 (MPA) and is based on a 4:1 factor of safety.
Manufacturing Proof Force (MPF) is the force to which during manufacture the chain is subjected to. The mean stress at this load is 500n/mm2 (MPA) which is 2.5 times the working load limit.
Minimum Breaking Load (MBL) is the minimum force of which the chain must withstand before failure. The mean stress at this load is 800n/mm2 (MPA). The minimum elongation before failure is 20%.
Equipped with a clevis grab hook on each end. Working load . Breaking strengh is all qualified. Can be assembling with grad hooks, sling hooks, master links, clevis pear links, load binders, webbings, shackles, connecting links and triangle and rings to package as one set.
Warning: Not for overhead lifting. W.L.L.. (Sold Per Foot)
Cut Chain is available.
Widely used in lifting conditions, sling conditions,trailer condition, marine conditions,container and port lashing conditions and logging conditions
Easier to be connected with shackles, chain links and rings, chain slings, hooks,pulleys,etc
Stronger performance during working
Many sizes can be choosed according to the different daily working
Material: alloy steel
Safety factor: 4:1
Size: M1-M16 (other size can be customzied)
Other size can be available.
CAUTION: Do NOT use Breaking Strength for design or rating purposes. Use Working Load Limit instead. It assumes no responsibility for the use, misuse or misapplication of its products. All products are sold with the package understanding that the purchaser and/or user are thoroughly familiar with their proper use.