Epoxy Resins for River Table

MTB-2103 Thick Pour Super Cast Epoxy--1.5 Gallons Kit

Cures to a clear, UV resistant, glass-like finish that resists scratching and yellowing.

MTB-2103 is a perfect casting and see through encapsulation epoxy, it is commonly used where a crystal clear encapsulation of objects is required.

More Features

--Magnifies Object Appearance
--Tough Water Resistant Finish
--Eliminates Craters, Crawling and Fish Eyes
--Will not blush or sweat under high humidity
--Will not distort with age

MTB-2103 Thick Pour Super Cast Epoxy --1.5Gallons Kit

Perfect for casting and see through encapsulation of objects such as Coins, Photos, Wood, Metal, Concrete, Granite, Copper, Stainless Steel, Bamboo, Leather, Ceramic, Artwork, Rocks, Sea Shells, Fabrics, Paper, Dried Plants and much more

Just look at some of the applications below and you will find that this is the ONE resin for your many casting projects and applications.:

Furniture Manufacture

It has superior working time, good cures times, easy to mix by volume and can be even be applied over most other brands of cured epoxies. When modified with fillers, tints and pigments, outstanding effects can result. 

Coffee Table

Deep Cast Clear Epoxy Resin is ideal for cast coffee table applications as it is Ultra Clear and high gloss. 

MTB-2103 Thick Pour Super Cast Epoxy --1.5Gallons Kit

Depends on volume required. If using resin as a coating,then coverage depends on temperature (Epoxy resins before mixing act a little like honey - in that in summer, they are very runny while in winter they are very stiff) and so coverage can vary up from 250 grams per square meter per coat. 

MTB-2103 Thick Pour Super Cast Epoxy

We have got the below packages for your options,that is
--1.5gallons kit ,that is A:1gallon,B:0.5gallons

--3gallons kit,,that is A:2gallons,B:1gallon
--15kgs kit,that is A:10kgs,B:5kgs
Accept OEM&ODM

If I am doing my project in multiple pours, when can I pour the next layer?

You can pour the next layer after the previous pour has gone through its heat cycle, which is usually around 24 hours. The rule of thumb is if you can make a imprint with your finger nail in the epoxy you can pour again and the epoxy will chemically bond to the previous layer. 

If you've passed that point, sand the surface of the previous layer with a high grit sand paper (180-220 grit). This creates a rough surface for the next layer of epoxy to stick to. 

Once sanded, clean the surface with an alcohol based cleaner like de-natured alcohol to remove all the dust from sanding. After that, you're good to pour!

Is MTB-2103 Crystal Clear?

ur wood finishing products of MTB-2103 is crystal clear once cured. Color can be added with liquid or metallic pigments.

My Liquid Plastic isn't curing. What can I do?

The resin has hardened and/or turned white.

The white or crystallized product may form when resin sits for a prolonged period of time or if it freezes. 

To remove the crystallization, simply heat the resin to about 120℉ for an hour or two. This should bring it back to a clear state.

I'm having issues with air bubbles. What can I do to get a bubble-free pour?

MTB-2103, no extra attention to get rid of air bubbles because it releases them on its own due to its long cure time and low viscosity. If you're pouring over a surface that may release air during the 2-day curing process then those bubbles may get trapped and ruin your crystal-clear look. A sealer coat is advisable in this case.

How much heat can your epoxy withstand on a countertop or similar application?

Our products are rated with similar heat resistance to any on the market. No epoxies are heat proof or fireproof so leaving a hot pan or item on the surface will leave a visible mark.

What can I do to ensure a perfect pour with MTB-2103?

Buy the 2:1 ratio for a harder finish. Seal off the edges or surfaces that you're coating with a thin layer of epoxy prior to pouring. Double and triple check your mold for possible leakage, as this product is super thin and could leak out anywhere. 

Mix well for several minutes and then let the product sit in the bucket for 10 to 15 minutes to let the bubbles release before pouring. Once poured, keep an eye out for leaks and swirl the metallic pigments (if any) every few hours up until 12 hours after pouring.

Is MTB-2103 100% Solid based?

Yes,of course,it is.

Can I use other pigments than the MTB branded colors?

For best results, we recommend you use MTB pigments with MTB-2103 resins.There are other pigments that are also compatible with our products, but they have a lower concentration. Do your own testing, and go with what works for you.

What is the shelf life of your products?

If stored in a cool dry environment and in sealed containers, our solvent-free products have a near-unlimited shelf life. If the material is more than a year old, you should do a small test to make sure it still performs as expected.