Wooden beehives 8 and 10 frames langstroth bee hive
US $1.00-$10.00
Cattle Horse Hoof Nipper
- Category: >>>
- Supplier: Henan Growing Mechanical Equipment Co. Ltd.
Share on (62070761428):
Product Overview
Description
Product Description
Horse Hoof Nipper production
Horse Hoof Nipper
Horse Hoof Nipper
The type of cow hoof disease include rot disease, hoof deformation, hoof inflammation, hoof dermatitis,finger between the neonatal, hoof erosion and hoof trauma and so on.
In the above-mentioned hoof disease, rot disease and hoof deformation is the most common.
The Veterinary cattle hoof nipper cow cattle trimming hoof is used to cut the hoof tip and the tip of the hoof wall, clear the hoof at the end of the filth. Horse Hoof Nipper can control dairy cow disease effectively , protect the dairy cows health!
Horse Hoof Nipper can Application: cattle, sheep, horses, camels, etc.
Horse Hoof Nipper feature
Horse Hoof Nipper
Horse Hoof Nipper
Horse Hoof Nipper is made of high strength 45 # refined carbon steel, forming carbon steel pressure treatment, surface treatment black, shoe repair professional design. Excellent texture, the use of light, not afraid to fall, not easy to crack, sharp knife sharp, quick repair hooves, save time and effort. Horse Hoof Nipper is a good helper for pasture friends.
1. High-strength alloy aluminum, hardened forging, durable
2. The gap is tight, the workmanship is fine, and the crossing can be adjusted tightly.
3. Easy to operate, master control skills in a short time, saving time and effort
4. Good safety, will not break easily
Horse Hoof Nipper Five-step hoof repair
Horse Hoof Nipper
Horse Hoof Nipper
Horse Hoof Nipper
Horse Hoof Nipper
Horse Hoof Nipper
(1) After measuring the size, use a Horse Hoof Nipper to cut the horny edge of the hoof and the tip of the hoof. The distance between the hoof tip and the hoof crown skin and hoof angle is 7.6em~E right, the hoof tip is 0.5em higher than the hoof bottom, and the hoof bottom is 45 with the hoof longitudinal side. Around the corner.
(2) Remove the contamination at the bottom of the hoof and check for ulcers and cavities at the bottom of the hoof. Usually the length of the medial toe and the shape of the hoof are better, and the bottom of the hoof is thinner, so it is first flattened according to the standard size, and then the lateral toe is repaired with the inner toe as the standard. If the lateral toe is not sick, the lateral toe can be repaired to a greater weight than the medial toe to reduce the weight of the hoof and the middle of the hoof, and the hind limbs stand normally. If there is a disease such as ulcer on the lateral hoof, proceed to the next step.
(3) If the outer hoof is sick, the horny horn should be repaired more, so that the toe is raised, the weight is reduced, and the live tissue is prevented from being contused and bleeding. The contact between the affected toe and the ground is reduced, making it easier to maintain a dry state, promoting new keratin formation and keratin hardening, and accelerating recovery. If the hoof has an ulcer, the ulcer should be cleaned, exposed to live tissue, and allowed to recover on its own.
(4) The middle hoof bow is trimmed into a half moon shape.
(5) Repair the loose keratin around the bottom of the hoof, remove the surface exudate, and do not damage the live meat layer. If there is inflammation at the hoof, Veterinary cattle hoof nipper cow cattle trimming hoof can be rubbed with iodine; there is ulceration at the hoof, and it can be rubbed with 10% chlortetracycline. Usually the forefoot hoof only needs to correct the hoof tip with a forceps or a rasp.
(2) Remove the contamination at the bottom of the hoof and check for ulcers and cavities at the bottom of the hoof. Usually the length of the medial toe and the shape of the hoof are better, and the bottom of the hoof is thinner, so it is first flattened according to the standard size, and then the lateral toe is repaired with the inner toe as the standard. If the lateral toe is not sick, the lateral toe can be repaired to a greater weight than the medial toe to reduce the weight of the hoof and the middle of the hoof, and the hind limbs stand normally. If there is a disease such as ulcer on the lateral hoof, proceed to the next step.
(3) If the outer hoof is sick, the horny horn should be repaired more, so that the toe is raised, the weight is reduced, and the live tissue is prevented from being contused and bleeding. The contact between the affected toe and the ground is reduced, making it easier to maintain a dry state, promoting new keratin formation and keratin hardening, and accelerating recovery. If the hoof has an ulcer, the ulcer should be cleaned, exposed to live tissue, and allowed to recover on its own.
(4) The middle hoof bow is trimmed into a half moon shape.
(5) Repair the loose keratin around the bottom of the hoof, remove the surface exudate, and do not damage the live meat layer. If there is inflammation at the hoof, Veterinary cattle hoof nipper cow cattle trimming hoof can be rubbed with iodine; there is ulceration at the hoof, and it can be rubbed with 10% chlortetracycline. Usually the forefoot hoof only needs to correct the hoof tip with a forceps or a rasp.
Horse Hoof Nipper importance of hoof repair
Horse Hoof Nipper
Horse Hoof Nipper
The Horse Hoof Nipper is to treat the cow. The Veterinary cattle hoof nipper cow cattle trimming hoof is a common disease in the cattle farm. The sick cow will have its bad legs standing upright and the knees will bend to reduce the stress and relieve the pain, so the cow becomes a yak. Because the painful cow will lose appetite and reduce the diet for a long time, the cow will become thinner and thinner, the milk production will be less and less, and the whole resistance will decrease. At this time, the hoof must be used to treat the cattle. The parts of the decay and necrosis are cleaned up in time, so that the condition of the cow is cured. Therefore, it is very important to do nail care for the cow.
Horse Hoof Nipper tech data
Horse Hoof Nipper live use show
| Product name | Horse Hoof Nipper |
| Application | cattle, sheep, horses, camels, etc. |
| Function | hoof nipper for cattle, sheep, horses, camels, etc. |
| Material | Stainless steel |
Packaging & Shipping
Veterinary cattle hoof nipper cow cattle trimming hoof
All the goods exported are packed in wooden case or carton with export standard except naked package when necessary.We have our own professional shipping company which could deliver the goods to every corners in the world with safety and speed, and aslo can supply the services of solving the problems occured during the transaction, such as customs cleaning.
Company Information
Henan Growing Mechanical Equipment Co.,Ltd is an professionalenterprise which is specialized in designing,researching and exporting agricultural machinery, food machinery, poultry machinery and gardening machinery etc. Our company was established in 2010,and expanded foreign trade business in 2018. Our products are widely popular in both domestic and world market.
Growing Company is your faithful partner to success.
Our Services
Service before sale:
1.24 hours online .Your inquiry will be quick reply by email .
Also can go through all questions with you by any online chatting tools (Wechat , Whatsapp, Skype, Viber, QQ, TradeManager )
2.Professionally and patiently introduction, details pictures and working video to show machine
Service on sale:
1.Testing machines and inspect the machine seriously.
2.Sending the machine picture which you order , then packing it with standard export wooden box after you confirm the machine is ok .
3.Delivery: If ship by sea .after delivery to seaport .Will tell you the shipping time and arrival time . Finally, send all original documents to you by Express For Free.
If delivery it by Express to your door(DHL, TNT, Fedex, etc) or by air to your airport, Or logistic to the warehouse which you request . We will tell you the tracking number after delivery.
Service after sale
1. Free insurance for goods
2. 24 hours online to solve any problems . Supply you English manual book and technical support , maintain and install video to help you solve the problem, or dispatch worker to your factory.
FAQ
1.What is the voltage/phase for this machine ?
220V 50Hz/single phase ,380V 50Hz/three phase ,110V 60Hz/single phase etc.We also can made as the clients’ need.
2. What kind of transport can be available ?
LCL and FCL by ship ,By Express (DHL,TNT, Fedex etc) , By air or you can use your own shipping agent in China.
3.How long will the machine be sent out?
We usually delivery in 3-5 working days after getting full payment, and we will inform you shipping time based on your seaport.
4. How long is the guarantee?
We promise guarantee as one year for non-human damage factor.
5. What should we do when have some problems during using?
We can supply English manual book and also take a video for showing how to resolve the problems or dispatch our worker to your factory.
6. What about Payment term?
a.T/T(Telegraphic Transfer ) .
b. Trade Assurance
c. Western Union
7. What’s your MOQ
1 set
We Recommend
Factory price hot sale livestock panels cattle panels sheep panels
US $920.00-$1000
2022 Beekeeping deep bee hive wood bee frame
US $0.17-$0.54
New Arrivals
New products from manufacturers at wholesale prices
