YIHUA 899D hot air solder soldering and rework station rework station
- Category: Other Welding Equipment >>>
- Supplier: Guangzhou Yihua Electronic Equipment Co. Ltd.
Share on (62218521864):
Product Overview
Description
YIHUA 899D+ hot air solder soldering and rework station rework station
Main function
1. High-quality resistance good for long service life , low noise.
2. Microcomputer control , warms up quickly , and so does cooling.
3. Handle with sensor switch, the system will turn into the working mode while the handle is held; and the system will standby while the handle is put on the holder, which is very convenient and Energy Save.
4. Suitable for SOIC , CHIP , QFP ,PLCC , BGA , Heating Shrink , Drying , Lacquer Removal , Ice-Out ,
Pre-Heating and other temperature - sensitive components .
5. Closed circuit Sensor , microcomputer zero-crossing soft touch temperature control, LED visual display , high power , rapid rise of temperature , accurate and stable temperature , little influence of air outflow , and unsoldering without lead.
6. Be able to operate individually, work independence;LED digital display accurancy 1 °C.
7. Wind volume and temperature are adjustable , suitable for many kinds of use .
8. Using sillica gel line good for long use.
9. This product is ESD-protected and CE approved
10. Shell using alloy material, elegant appearance; Intelligent detection and cool airflow features.
YIHUA 899D+ SOLDERING DESOLDERING STATION
The power of soldering iron station is 75W
NEW Features (Energy Saving and Convenient )
Manual / Auto Switchable for Rework Operation
[Hot air gun]
1. Put the key to auto
When you put the hot air gun on the holder, the hot air gun will cooling to 100°C and automatic shut down .
Next time, when you take up the hot air gun, it will automatic heating up to the original temperature you have been set .
2. Put the key to manual
When you put the hot air gun on the holder, the hot air gun still work along.
[Soldering iron]
The blue key would set up 2/5/10/20 minutes
1.If you set up 2 minutes , when you put the soldering iron on the holder after 2 minutes that the soldering iron will enter the standby mode (200°C).
Next time , when you take up the soldering iron , it will automatic heating up to the original temperature you have been set .
2. If you not set up the minute that the soldering iron will keep the temperature along with your using.
·Blue /RED digital LED displays for Both rework and soldering station.
·The air flow and temperature with control keypad.
Technical Data
| Power consumption | 750W |
| Hot air Temperature range | 100-480°C |
| Hot air heater material | Skeleton heating element |
| Hot air heater resistance | 74Ω |
| Hot air type | Brushless Fan |
| air flow | 120L/min |
| Soldering Iron Temperature range | 200-480°C |
| soldering Iron Type | Blue Handle |
| Soldering Iron Heater material | Imported high-power heater |
| Soldering Iron heater resistance | 3.5~4.1Ω |
| Gross weight | 3.15KG/pcs |
| Inner box Dimension(cm) | 26*16.5*14.8 |
| Outer box Dimension(cm) | 57.5*36*32 |
| QTY | 8PCS PER outer carton |
What's in the box
* main unit + gun + power cord
* guide soldering iron
* soldering iron holder
* 4 nozzles
These are 220V units you may need a transformer to use the machine in your country. we also do accept special orders for 110V / 230V/ 240V units.
We Recommend
Automatic concrete pile rebar cage welding machine
US $3000-$15000
High quality mini igbt mma arcwelders manufacturer
US $130.00-$140.00
New Arrivals
New products from manufacturers at wholesale prices
