Multifunctional Super Laser Cold Welding Machine Stainless steel cold welding machine sheet plate cold welding machine
- Category: >>>
- Supplier: Shanghai Shengzao Mechanical Electrical Equipment Co. Ltd.
Share on (62316173125):
Product Overview
Description
Product Description
Stainless steel cold welding machine sheet cold welding machine/anti-theft window welding machine/multi-function cold welder
1.Welding Machine Difference
Nowadays, there are three kinds of welding machines in the market:
(1) Argon arc welding machine: the argon arc welding machine has high welding efficiency, but in the welding process, the deformation is large, the weld joint is rough, and so on. It is the welding machine with the highest utilization rate on the market at present. But it takes 3-5 years for argon arc welders to mature and cost a lot of labor. Limited to "people".(2) Laser welding machine: its expensive price is enough to make people hesitate.
(3) Precision cold welding machine: welding principle is high frequency discharge and instantaneous high temperature principle. Its welding characteristics are silver white, small deformation, and clean fish scale. Ordinary workers are also operable, focusing on the release of "manual". Not limited by operation and its welding characteristics, it can save a lot of labor costs and solve the trouble caused by the follow-up process.
2.Main Functions
(1) Repair cracks as this machine with good compact and permeability.
(2) Soldering thin stainless steel plate, table-board, tube together.
3.Application Essentials
(1) Main characteristics of thin plate cold welder welding:
When CWT(Cold Welding Technology) is used to weld stainless steel sheet, the effect is obviously better than that of traditional welding machine. It has the advantages of small output current, less heat concentration, less heat affected zone, smaller welding deformation, uniform heat source input at all points of the weld, better control line energy, cooling effect of protecting gas flow, reducing surface pool temperature and increasing surface tension of the weld pool, simple operation, mechanical properties of the weld and so on. It has the advantages of good compactness and beautiful surface forming.
At present, CWT welding is widely used in all walks of life, especially in stainless steel sheet welding.
(2) Splice welding:
Splice welding refers to splicing two sheets of the same thickness into one piece, or welding the rolled sheet into a whole, when splicing welding, the splicing seam of spare parts should be small and flat.
Splice welding refers to splicing two sheets of the same thickness into one piece, or welding the rolled sheet into a whole, when splicing welding, the splicing seam of spare parts should be small and flat.
4.Advantages
(1) Small heat affected zone while welding.
(2) No need preheating processing, no need annealing for the work pieces after welding.
(3) No deformation and edge after welding.
(4) No air hole and sand holes after welding.
(5) Precise and accurate: can weld very small and precise part, the finest wires used for welding can be 0.10mm-0.20mm.
(6) It is convenient and flexible for welding, site repair is also available.
(7)Widely used in repair all cracks, sand holes, collapse edges, corners, abrasion, etc.
(8) It is also available welding the toughing mouth of cold dies and tools. Thus exempt from the preheating, heat preservation process of ordinary arc welder.
5.Applications and introduction
(1)Kitchen Equipment/ Stainless-steel Table Board/ Sink.
(2)Stainless-steel Products/ Stainless-steel Advertisement Characters/ Advertisement Frames/ Doors and Windows/ Light Box/ Main Case/ Electricity Box.
(3)Available for stainless steel panel welding ( E.g. Rose Gold Plate/ Mirror Board/ Colored Stainless Steel Sheet/ Duplex Stainless Steel/ Checkered Steel Plate/ Series 200 Stainless Steel/ Series 300 Stainless Steel etc.)
(4)Defects of Cavity Corrosion etc.
Model | RH-2100 | Range of welding wire | 1.0-2.0mm |
Input | AC 220V±15% 50/60HZ | Welding thickness | 0.2-4mm |
Power | 0-40KW | Cooling way | Forced air cooling fan |
Max Power | >40KW | Total weight | 24KG |
Output | 0-500A | Size | 400x220x290mm |
Frequency | 1-5HZ | Warranty | 1 year |
Welding Case
1. To Weld Metal Crack
2. To Weld Stainless Steel Plate
3. To Weld Stainless Steel Plates Into a Box
4. To Weld Steel, Iron Together
5. To Weld Pin Holes
6. To Weld Corner or Some Hard Parts of Metal
7. To Weld Moulds Material Scratch, Abrasion, Crack, etc
8. To Welding Crack In Stainless Steel
9. To Weld Hydraulic Cylinder Crack
Our Service
1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. After sending, we will track the products for you once every two days, until you get the products. When you get the goods, test them and give me a feedback. If you have any questions about the problem, contact with us, we will offer the solution for you.
Our Company
Factory
Our Factory
Workshop
Our Workshop
Warehouse
Our Warehouse
Team
Our Team
Packing & Delivery
Packing Details : Standard export package
Delivery Details : 1-2 days after received the payment (small quantity) or 30days(big quantity)
Certifications
Custom Photos
FAQ
Q: Are you trading company or manufacturer?
A: We are factory and manufacturer
Q: How long is your delivery time?
A: Generally it is 1-2 days if the goods are in stock. It is 7-15 days if the goods are not in stock. Above all, it is according to quantity.
Q: What is your terms of payment?
A: If the order quantity is less than 100pcs, 100% in advance. The order quantity is more than 100pcs, 30% T/T in advance ,balance before shippment.
If you have another question, please contact us.
Contact information
We Recommend
Automatic concrete pile rebar cage welding machine
US $3000-$15000
High quality mini igbt mma arcwelders manufacturer
US $130.00-$140.00
New Arrivals
New products from manufacturers at wholesale prices
