High Temperature 300C Available STACK FLUE SENSOR STA RITE NTC Sensor 42002 0024S For Pentair Sta Rite Heaters

Product Overview

Description

High Temperature 300C Available STACK FLUE SENSOR STA-RITE NTC Sensor 42002-0024S For Pentair Sta-Rite Heaters

 

 

 

A stack flue sensor, located on the exhaust elbow of a pool heater, prevents the flue gas output from exceeding 500°F. When this fails, your system will show error codes E05 or E06 to indicate that the stack flue sensor must be replaced. 

This replacement stack flue sensor from Optimum Pool Technologies is compatible with Pentair’s MasterTemp, Max-E-Therm, and other Pentair Sta-Rite heaters. It is designed specifically to replace the Sta-Rite heater stack flue sensor.

 

 

   

 

Compatibility	Pentair’s MasterTemp, MiniMax, Max-E-Therm, and other Pentair Sta-Rite heaters
Replaces	Pentair Sta-Rite 42002-0024S

 

 

 

 Replacing your broken stack flue sensor is easy! Just follow these steps:

1. Turn off the filter pump and all electrical power to the pool heater.

2. Allow the heater to cool for at least 30 minutes before proceeding to the next step.

3. Unbolt and remove both the upper left and upper right jackets from the heater.

4. Disconnect the wires from the old indoor stack flue sensor. 5. Remove the old sensor by turning it counter-clockwise with a ½” open end wrench. 6. Install the new sensor, sealing it with a bead of RTV sealant before threading it into the exhaust elbow. 

 

 

 

 

 

Bulk,

100pcs/carton

3kg/carton

C/NO: 37*31*7cm