industrial small business rubber crusher waste tire shredder tyre powder machine machine grind tire
industrial small business rubber crusher waste tire shredder tyre powder machine machine grind tire
The LK-M series miller is used to grind rubber powder. it is belong to final step in whole waste tire recycling production line.
the first step is TS series tire shredder machine, is used to shred the whole tire into TDF rubber chips in 50*50mm.
the second step is HVST-R series tire rasper machine, is used to make the rubber mulch in 10-30mm. it can be colored rubber mulch as filler of lawn or garden.
the Third step is LK-G series tire granulator, is used to make the crumb rubber or rubber granules without wire and nylon. it is third step in whole tire recycling production line.
the car tires, truck tires, trailer tires, OTR tires upto 4000mm can be shredded by our tire shredder;
whatever the frozen tires or not clean tires both can be processed by our machines.
Feature The pre-grinding system can be equipped with bolt cutting tools to minimize operating costs and simplify line maintenance. The two-stage rasper system effectively releases steel from the rubber for efficient separation and clean line production. The fine granulation system is equipped with a special rotor specially designed to reduce the rubber size of the tire. It provides maximum throughput while minimizing the amount of fines generated. The machine is also optimized for low operating and wear costs. Inhale textiles and dust at several locations in the recycling system. The central reverse jet filtration system extracts dust from the entire system. Our milling system can be installed at the rear of the tire recycling system. The size and configuration of the milling system is configured according to specific production requirements, ie size and throughput. An advanced sound attenuating enclosure is available to reduce the noise level of the system to <85dBA. Water spray and atomization systems are installed on critical components to keep process temperatures safe and prevent fires. System automation ensures component operation links, maximizes system capacity, and best protects the system from interfering materials.
Detailed Images
Step 1, TIRE SHREDDER: Used to shred the whole tires into rubber blocks, NO NEED DRAW OUT THE WIRES FROM TIRE BEAD, NO NEED CUT THE TIRES TO RUBBER PIECES. CAN BE FEED IN TIRE SHREDDER DIRECTLY. Step 2, RASPER: It can process and produce 10-30mm wire free chips, the steel wire will be separated by rasper and attracted by magnet. Step 3, GRANULATOR: is designed to grind the rubber mulch from the rasper into small granules as fine as 1mm. The granules are screened and re-circulated until the desired size is reached. Step 4, Miller: is designed to crush the rubber granules to rubber powder in 0-1mm.
Usages
the rubber powder in 30-120mesh
10-30mm colored rubber mulch.
most colored rubber mulch will be used in garden, floor or yard as filler, if used in rector to make fuel oil, then not only protect the rector, but also higher the capacity.
1-7mm rubber granules.
mainly used in running track and playground after making rubber tiles.
