Changzhou Fante Trading Co.,Ltd, is focusing on providing agent services of marketing, selling and purchasing on high speed electric spindle motor, mold manufacturing, stamping products, wire harness and home appliances products. We cooperate with manufacturing factories with advanced design and manufacture abilities, as well as excellent facilities and strong technical forces. We have the strong after-sales team to provide the good service. Our products are well sold both at home and abroad with the nice factory price.

Our mission is “Quality first, Reputation based, Honesty wins the world”. Warmly welcome you and opening up the boundaries of communication. We synchronize with your ideal partner!

QUALITY ASSURANCE

To provide quality products at the same time to improve after-sales support

ONE-STOP SERVICE

We have competent R&D Group and expe- rienced engineers

INDEPENDENT FACTOR

We have own assem- bling factory and mold factory

PROFESSIONAL TEAM

Professional team to provide you with efficient service

1.The electric spindle and the frequency inverter shall be suitable with each other. The specifications and parameter settings of the inverter shall match the nominal parameters of the spindle, and it will burn the spindle if the settings are not correct.

2. Before using water-cooling spindle, it shall ensure that cooling cycle system works normally and the running under no cooling conditions is prohibited. The volume of cooling water is calculated as per 1 liter/kw, minute, the minimum flow of cooling water is not less than 5 liter/minute, cooling water pipe and the nozzle shall be connected reliably and there is no leakage.

3.The cooling liquid shall be clean and free of grease and the temperature shall be within 5-30℃. The cooling medium shall carry out force cooling when the ambient temperature is higher than 30℃. The precision lathe requires the cooling liquid with a constant temperature of 20℃.

4.During storage and transport of the spindle, the status of highspeed grease inside the bearing will change. The user shall run it at a low speed first by starting from the lowest speed of the spindle for 30 minutes and then 20 minutes for every 3000 rounds; otherwise there will have abnormal sound, noise, heat and other phenomena, which will affect the bearing life if the spindle is started directly at a high speed. During long term storage, the spindle shall run (at Iow speed) for 15~30minutes once a week at least.