A good bit of suction high temperature resistant solder tin sucker desoldering vacuum pump with one hand operation
- Category: Desoldering Stations >>>
- Supplier: Shenzhen Chenzhou Technology Co. ltd.
Share on (62544244869):
Product Overview
Description
Solder Sucker Desoldering Vacuum Pump Solder Removal Tool
Good little solder sucker,have a good bit of suction,you can just hang onto it and use your thumb to reset and suck
Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily
Very sturdy,will worke good to remove existing solder from a circuit board
Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering
The solder sucker measures 185mmX20mm, which will fit your hands perfectly no matter if you are left-handed or right-handed. With metal body and high pressure vacuum, this desoldering pump can help you suck the solder away effectively
How to Use the Desoldering Pump
Step 1: Press the plunger down until it is been locked and you will hear a click;
Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid;
Step 3: Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solderpuddle with the pump's tip. Pull the trigger;
Step 4: Repeat this process if necessary.
Step 1: Press the plunger down until it is been locked and you will hear a click;
Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid;
Step 3: Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solderpuddle with the pump's tip. Pull the trigger;
Step 4: Repeat this process if necessary.
How to Use the Solder Wick
Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
Step 2: Remove the wick once the solder has been absorbed;
Step 3: Cut off the used part of the wick;
Step 4: Repeat this process if needed
Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
Step 2: Remove the wick once the solder has been absorbed;
Step 3: Cut off the used part of the wick;
Step 4: Repeat this process if needed
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
