ET4510 Настольный цифровой мостовой измеритель емкости сопротивления индуктивности LCR моста L

Сохранить в закладки 1600151966882:


Цена:320,00 $ - 318,00 $*

Количество:

  • В избранное

Описание и отзывы

Характеристики



This series the LCR digital bridge is designed using automatic balance bridge principle component parameter analyzer, the tests of 10Hz~100kHz bandwidth, frequency adjustable, 0.2% of the basic classification function provided by the accuracy of measurement and instrument for the vast majority of components and materials to provide accurate and complete the survey and analysis, is widely used in product research and development, components such as incoming inspection, product online applications.


 


 


Measurement frequency up to 100kHz


Test level 100 ~ 2000mV


Support the measurement of DC resistance and electrolytic capacitor


Internal bias voltage output (1mV-1500mV)


Automatic identification of component measurement


3.5-inch TFT display, 5 and a half bits display


USB, RS232 communication interface, Handle sorting


Data recording function (maximum and minimum values, average value)


Support SCPI communication protocol


Provide system settings, which can configure language, buzzer, screen brightness, etc according to the needs of users.


Basic accuracy 0.2%


Manual and automatic range


Be equipped with open circuit and short circuit correction


Comparator has sorting and alarm function


Provide a variety of test ports


 


 

















































































Model



ET4401



ET4402



ET4410



ET4501



ET4502



ET4510



Digits



Main parameter: 5 digits; secondary parameter: 5 digits



Measurement Parameter



Main parameter: L/C/R/Z; secondary parameter: X/D/Q/θ/ESR



Measurement Range(L)



 0.01μH - 9999H



Measurement Range(C)



0.01pF - 99999μF



Measurement Range(R)



0.0001Ω - 99.99MΩ



Basic Accuracy



0.2%



Test Frequency (Hz)



100~10kHz  10 point



100~20kHz  12point



100~100kHz  16 point



 10~10kHz  1Hz Stepping



10~20kHz  1Hz Stepping



10~100kHz  1Hz Stepping



Measurement Display Speed



2 times/second (slow), 4 times/second (medium speed), 8 times/sec (fast)



Internal Bias



0-1500mV adjustable, 1mV stepping



Test Level



100mV,300mV,600mV,1000mV,1500mV,2000mV



0.1V~2V adjusted   ,1mV  Stepping   



Correction Function



Open circuit correction, short circuit correction



Screening function



The screening limit can be set from -50% to + 50% with fixed points of 1%, 5%, 10% and 20%



Selection of comparator



Five gear sorting, third gear qualified, one gear failed, one ancillary gear



Communication Interface



Standard configuration: USB, RS232 (or 485), Handle interface; Optional: GPIB, USB Host



Others



Support DCR, electrolytic capacitor measurement mode, adjustable backlight brightness,  optional in English and Chinese



 


 



 Power connection


(1) Power supply voltage range: 220V AC ± 10%, or 110V AC ± 10%.


(2) Power supply frequency range: 45-65Hz.


(3) Phase line L, zero line N, and ground line E of power input shall be the same as those of the power plug of this instrument.


(4) The instrument has been carefully designed to reduce the clutter interference caused by the input at the AC power supply terminal. However, it shall be used in a low noise environment. If such is not the case, please install the power supply filter.


WARNING: In order to prevent leakage from causing damage to the instrument or person, the user must ensure that the ground line of the power supply is reliably connected to the earth.


(5) Power consumption: less than 20W.


 


1.1 General Technical Specifications


Power supply voltage: 220V AC ± 10%, or 110V AC ± 10%, 45-65Hz


Working environment: 0 ~ 40 ℃, relative humidity <80%.


Storage environment: -10 ~ 50 ℃, relative humidity <80%.


Dimensions: 265mm * 105mm * 305mm (width * height* depth).


Mass: 2.3kg.


 


 


Standard Accessories:


Four-terminal-pair Kelvin test cable (35A51).


Three-core power cord (30A51).


One User Manual.


 


Optional accessories:


RS232 serial cable / USB data cable.


Handle cable.


Four-terminal-pair Kelvin test fixture (including short block)


SMD component test fixture (including short block)


 


 


 


Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам