Фармацевтический падающий пленочный Испарительный концентратор

Сохранить в закладки 1600253598559:


Цена:21 000,00 $*

Количество:

  • В избранное

Описание и отзывы

Характеристики


Pharmaceutical falling film evaporation concentrator, high evaporation speed, can be PLC control


 


Application:


 


The  Falling film evaporator is applicable for dairy  products, pharmacy, glucose, starch, chemical industry, xylose, citric acid, ammonium sulfate, biological  engineering, environment engineering and waste liquid recovery and treatment etc.


 


Composition:


 


It contains of 1st-effect, 2n-effect and 3rd-effect evaporators, 1st-effect, 2n-effect and 3rd-effect separators, pre-heater, condenser and hot pressure pump.


 


Equipment characteristics:


 


(1) Low evaporation consumption, 1Kg steam can evaporate 3.5Kg water.


 


(2) Low evaporation temperature. Part of twice steam can be inhaled into single-effect heater through spray type hot pressure pump. The high quality evaporation can be fully used and the evaporation temperature is low.


 


(3) Large concentration ratio with downward film type evaporation, which can make material liquid with viscosity be so easy to flow and evaporate, Hard to agglomerate with


short concentration time. The concentration ratio can reach 1:5.


 


(4) The equipment can realize automatic production, intellectual system, which is conformity with GMP standard.


 


Technical parameters:


 



























































































ModelFFE-500FFE-1000FFE-1500
Evaporated capacity(kg/h)50010001500
Steam pressure(Mpa)Single effect80-9085-9585-95
Double effect65-7565-7565-75
Three effect55-6055-6055-60
Vacuum degree(Mpa)Single effect0.040.040.04
Double effect0.060.060.06
Three effect0.080.080.08
Concentrated rate1.351.351.35
Steam consumption(kg/h)230350600
Recycle water(T)5815
Steam inlet(Φ)324357
Vacuum tube(Φ)80109159
Dimension(L*W*H)mm5400*1000*28007000*1500*34008250*1600*3600

 


Packing:


 


Strong seaworthy wooden case/wooden support/Iron support.


(1) LCL (Less container load) Pack by waterproof plastic film first,then pack by plywood.


(2) FCL(Full container load)  Fixed on wooden support by steel wire.


(3) If large tank, pack by waterproof plastic film first, then fixed on wooden support by steel wire.


 


1.jpg


 


2.jpg


 


3.jpg


Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам