Сохранить в закладки 1600344122441:
Product introduction | ||
name | Double - sided ladder-type PVC material NFT indoor hydroponics planting equipment | |
parameter | 98cm(L) 60cm(W) 103cm(H) | |
material | Environmental PVC-U water pipe | |
feature | Safe, simple, convenient and environmentally friendly | |
installation | simple assembly | |
packaging volume | 83*27*26(cm) | |
weight | 10.3kg |
Our pipes are designed by tidal method, and when the pump is started, the water level is in a state of saturation.
The seed should not be removed from the orifice, and the seed should be nourished by the nutrient solution.
When the pump stops, the water level will slow down, and can have a good air permeability.
Our planter tube diameter is 63mm, wall thickness is 2.0mm, hole diameter 30mm;
The small pipe next to it all adopts PVC-U water pipe, with a diameter of 32mm, with a wall thickness of 2.4mm, 1.6mpa, higher strength, greater bearing force, and more stable planter.
The hydroponic equipment was originally equipped with plant seeds and concentrate (used for plant growth), but it was not equipped with both transport and export restrictions.
This hydroponic system is not equipped with a reservoir.
Ordinal number | Appellation | Quantity | Specification |
1 | Planting frame | 1pcs | Self-installation; Convenience and simplicity; Make use of PVC-U drinking water pipe. |
2 | Submersible pump | 1pcs | |
3 | Controller | 1pcs | |
4 | Yukon cotton sponge | 1pcs | It can be divided into 96 pieces for seedling. |
5 | Engraftment basket | 72pcs | |
6 | Absorbent cloth | 2pcs | Used for germination or live broadcasting |
9 | Teflon tape | 2pcs | Seal (usually not leaking, do not need to be used) when installing 8 fixed pipe. |
Soak the seeds in clear water for a few hours to soak up the moisture. Then cover the seeds with a breathable wet cotton cloth or gauze, and keep the seeds moist waiting for seeds to germinate.
When you put it down, the bud is the root of the seedling. The sponge should be soaked with water in advance, whichcan be pressed by hand appropriately, make the sponge absorb water; Place the seeds in the upper end of the soaked sponge. Pour water into the basin, about 1/3 of the sponge.
After the seed is seedling, replace water with nutrient solution.
Switch to a nutrient solution 2-3 days.
The seedlings can be transplanted to 3-4 leaves.
Separate the seedlings.
Put the seedling in the planting basket (its roots will be exposed from the planting basket).
Finally, put into the implant hole.
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
A: Low MOQ, 1pc for sample checking is available
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
A: Yes, we offer 2-5 years warranty to our products.
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.
Новинки товаров от производителей по оптовым ценам