Индукционный нагреватель 5 кВт/5000 Вт индукционная нагревательная машина с нагревательной катушкой для материнской платы водяной

Описание и отзывы

Характеристики

5KW/5000W Induction Heater Tool Induction Heating Machine with Motherboard Heating Coil Water Pump

Description:
It is a low-power induction heating machine with a DC48V power supply and a maximum current of 100A and a power of 5000W. It is mainly used for heating and quenching of small ferrous metal materials. It can be used with our 70mL or 150mL graphite crucibles up to 1600°C. It easily melts metals such as iron, copper, gold, silver, aluminum, etc.

Features:
- Adopt 2mm PCB and 2OZ copper thickness, featuring large current, good heat dissipation
- 4pcs 9025 high power cooling fan
- Heating coil is wrapped with high temperature resistant insulating material to prevent short circuit during heating. Special customized heating coil is used
- Its input terminal uses high-current power terminals, which can be connected to a 100A power meter
- The heating coil is cooled by a water pump

Parameters:
1. Motherboard: 256 x 210 x 115mm/10.1 x 8.3 x 4.5"
2. Heating coil: 60 x 70 x 73mm/2.4 x 2.8 x 2.9" or 70 x 80 x 73mm/2.8 x 3.1 x 2.9" (Inner Diameter* Outer Diameter*H)
3. Input voltage: DC48V
4. Maximum power: 5000W
5. Maximum DC working current: 100A
6. Metal (iron) can be heated to above 1000℃
7. The maximum operating temperature of the crucible: 1600℃

Package Included:
- 1 x Motherboard
- 1 x Heating Coil
- 1 x Water Pump
- 2 x DC 12V 2A Power Adapters
- 1 x Water Pump Hose

Precautions:
1. If you use your own power supply, please ensure that the power supply can stably output a current of more than 100A. In general, use two 50A communication power supplies in parallel.
2. Power on/off sequence: first supply power to the power supply, wait a few seconds for the power supply to output stably, then turn on the power supply between the power supply and the motherboard (it is recommended to use a 100A air switch), and finally press the switch button next to the green interface. Please make sure to do it correctly, because wrong operation will burn out the motherboard (without special protection). When shutting down, first turn off the switch button, then turn off the air switch between the motherboard and the power supply, and finally turn off the power switch.
3. The equipment must work with water cooling and air cooling at the same time. If any of them do not work, you should disconnect the power immediately and contact us for solutions.
4. When conditions permit, it is recommended to use the mode of cold water entering and hot water being discharged directly, rather than the circulation method, ensuring better heat dissipation effect.
5. For users who use crucibles for a long time, please prepare more crucibles, because when graphite is heated at high temperature, it will react with oxygen to generate carbon dioxide and gradually consume the crucibles.
6. Always pay attention to the changes of various parameters of display screen, especially the voltage and current and the temperature of the motherboard. Once an abnormality is found, the power supply must be disconnected immediately.
7. When using a graphite crucible, a non-circulating water cooling method must be used (input cold water and discharge hot water into the sewer) to prevent the long-term high water temperature from affecting the service life (this water-cooling method is also recommended for long-term high-power operation ). After heating, the 12V auxiliary power supply must not be disconnected unless the crucible is taken out from the heating coil, otherwise the water pump will stop working and the heating coil will be burned out by the temperature of the crucible.

Detail photo

FAQ 

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

A: Sample ususally take within 3 working days.

Q3. Do you have any MOQ (minimum order quality)limit?

A: For standard product, usually 1pcs/item. For the OEM order, MOQ at least 50pcs/item.

Q4. How to proceed an order?

A: After buyer confirm the product&price is ok and ready to buy, order will be please tell us your delivery address, phone number, sometimes need email. Then we can draft the order and it will have a alibaba paying link.

Q5. After paid, what info of the supplier provided?

A: Tracking number

Q6: Do you offer guarantee and after-service for the products?

A: Yes, 6- 12 months warranty for our products. Note: We will do not take the responsibility for Man-made damage or improper operation. Delivery demage will be negotiate.

Packing and Shipping

Package: Normally we use the standard paper package to export worldwide.

Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

2. By chinese small parcel, usually for the customer to save the cost. But Chinese small parcel have the risk for lost parcel. Note: If we got the parcel back, we only can refund the item cost. If we didn't get the parcel,then sorry we can't refund any.

3. By Air: Delivery from the Shenzhen airport to customers’ destination city air port.

4. By Sea: Delivery from the Shenzhen sea port .

Company information

TZT has been speciliazing in Business & Industry,Hobbies & Toys,CNC Products and Health care supplies for over 5 years.We committed to enhance customer satisfaction by continually improving the process with a vision of expertise in the field. 
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!

Our Advantages:
-  Source only the best consumer goods and ensure the highest quality.
-  Streamline the buying and payment process, and make it as easy as possible.
-  Help the customers all over the world discover products and manufacturers in China.
-  The Shortest order processed time and speed delivery