KS-930 Polyurethane waterproof paint for roof coating, waterproof paint, pool paint, swimming pool paint, pool coating
Keshun devoted himself to research new high-quality waterproof materials, the Kangyou 930 (KS-930) is a new generation environment-friendly waterproof materials. The product is classified as key new product of Guangdong province 2005 and Shenzhen recommended project of superior new products 2005.
Excellent Features
Excellent Quality
KS-930 is a white liquid of single component that adopts advanced technology and uses modern production equipment, and it can make into cured cross linking agent by putting water directly, the active gene of coating reacts to water molecule, and then become waterproof film with rubbery properties.
Environment Friendly
Non-toxic and pollution-free, and it can solidify by putting water directly.
It has passed the test (GB/15193.3-2003) that it is non-toxic product.
It accords with the technical requirements for environmental labeling products: water-based paint (HJ/T201-2005)
It can be used in drinking water project.
Data Sheet
Item
Index
Ⅰ
Ⅱ
Tensile strength Mpa
Non-treatment
≥1.90
≥2.45
Alkali treatment
60~150%
60~150%
Acid treatment
80~150%
80~150%
Artificial weathering retention rates
80~150%
80~150%
Elongation at break
Non-treatment
≥500
≥450
Alkali treatment
500
400
Acid treatment
Artificial weathering retention rates
Tear strength (N/mm)
≥12
≥14
Heat shrinkage
-4.0~1.0
-4.0~1.0
Foldability at low temperature
Non-treatment
≤-40°C No gash
≤-40°C No gash
Alkali treatment
≤-35°C No Gash
≤-35°C No Gash
Acid treatment
Artificial weathering retention rates
Impermeability( 0.3Mpa, 30min)
Impermeable
Impermeable
Bonding strength with moist surface (Mpa)
≥0.6
≥0.6
Solids content %
92
92
Drying time
Surface drying Time
≤0.6
≤0.6
Hard srying Time
≤12
≤12
Where to Use
Upscale community, roof of non-exposed high standard buildings
Waterproof of kitchen & bath, swimming pool, fountain
Drinking water project
Railway, tunnel and underground engineering
How to Use
Construction method
Base layer treating:basic level processing liquid:powder:water(weight ratio)=1:1:0.9 to allocate base layer treating agent, spread on the base layer after fully stir, the dosage of the primer liquid is about 0.1kg/m2.
Coating construction: Confect the surface course by a ratio of KS930: water=1:0.2(weigh ratio), brushing after stirring with motor stirrer until the thickness meet the requirement.
Cautions
Construct after the base coating is dry.
After the coating mix with water, use it within 30 minutes.
Do not walk on the film until it becomes dry, protect coating layer.
Put some coarse sand on the coating wall to intensify the adhesive action between the coating and protective layer.
Wear protective cloth when working.
Make protective layer upon acceptance.
Add dryer while constructing in low temperature(0°C—10°C)
Packaging & Shipping
Transportation, Storage and Packaging
Avoid exposed to the sun and rain and colliding during transportation.
Storage: It must be stored at cool and ventilated space, and the temperature must above 0°C, do not upend.
Guarantee period: 12 months
Packing size: 10kg/jar, 20kg/ bucket
By sea in Container
LCL: Wooden boxes
FCL: Floor layer is wooden boxes, Second layer is wooden pallets.
Why choosing us:
One of top 3 building waterproof material manufacturer in China.
Professional and powerful R&D team to support technical service.
Four big factories are distributed in 4 big areas of China.
Get involved many big projects in China and Southeast Asia ,such as subway,tunnel,civil building,comercial building etc.
Excellent exported experience,exported to America,Australia,Russia ,Europe,Malaysia,Dubai,Middle east etc.
