Established in 2011, Allsharp is a professional manufacturer and trader specialized in the research, development and production of different kinds of knives,multitools,shovels,axes,etc. We are located in Yangjiang city which is famous of knives and scissors. All of our products comply with international quality standard and are greatly appreciated in a variety of different markets throughout the world.
Over the past few years of production and management and exploration, Allsharp has equipped many facilities for the production and set up its own quality management system. Allsharp products are widely recognized and trusted by users and can meet continuously changing economic and social needs.
If you are interested in any of our products ,Please feel free to contact us. All of us at allsharp love to hear from you.
FAQ
HOW SHOULD I STORE MY KNIFE
Always keep your knife clean. Wipe away debris and, if needed, wash with a mild detergent and dry thoroughly. Do not let your knives sit in water. Due to the high carbon content of the quality steel in our blades, the blade may corrode if not properly cared for. Wiping a light coating of oil on the blade and hinge before storage is also important for keeping your investment in proper working order. Most household oils, WD40, 3-in-1 oil, or gun oil will work just fine for maintaining your knife.
HOW SHOULD I SHARPEN MY KNIFE?
Hold the blade against sharpener at the original sharpened angle of 18°–22°. Beginning at the base of the blade and tip of the sharpener, pull the blade down and toward you across the top of the sharpener in a slight arc . Do the same thing across the bottom of the sharpener as shown. This sharpens the top of your blade.Repeat this “over and under” motion approximately three to five times on each side to fully sharpen your knife.
HOW SHOULD I ADJUST SCREWS?
Please use Torx bits (not an Allen wrench, which will strip the screws) to adjust screws on knives.screws are adjusted using either a T6 or T8 Torx bit, T6 fits pocketclip, handle, and safety-lock screws on current model knives. T8 fits the pivot screw.
WHAT DO I DO IF THERE IS OXIDATION OR RUSTING ON MY KNIVES?
If oxidation or rusting is present, clean and buff the affected area with a soft chamois and apply a coat of oil to the entire knife surface. For trouble spots utilize an anti-oxidation product (such as Miracle Cloth) after cleaning and then apply a protective product (such as Sentry's Marine Tuf-Cloth) to prevent further oxidation and repel foreign debris. You may also want to try a light steel wool pad (000 grit) to buff off the rust, and then re-apply the anti-rusting agent. Remember: rust and corrosion occur most often due to the absence of proper maintenance, so the best defense against oxidation or rusting is to keep your tool clean and well-oiled.
