Original OKI 5054A 7.2.1 With WIFI 6154A 1.8.9 V166 support 6154 OBD2 Scanner Diagnostic Tool for Audi Skoda Volkswagen
- Category: >>>
- Supplier: Shenzhen Chaos Knight Technology Co. Ltd.
Share on (1600935730769):
Product Overview
Description
Products Description
6154 5.1.6 Software Functions
– Estimated remaining times are shown for ECU flash operations.
– Diagnostic protocol contains interruptions of GFF sessions, extended measurement values, improved ECU communication view,used
diagnostic hardware, connection type of diagnostic hardware, operating system, the hotfix used and submissions of support requests
– The measured value display has been improved.
– Documents in GFF are displayed in separate windows.
– One message box will be shown at the beginning of the test drive mode.
– GFF hotfixes can be integrated during diagnostic sessions.
– Danger messages have been revised.
– Stopping of diagnostic sessions may be interrupted.
– Automatic deletion of autosave diagnostic protocols after successful transmission.
– Selection of PassThru diagnostic hardware has been improved.
– Service Software update has been stabilized.
Some questions about 5054A and 6154 ?
1. Connection method:
5054A: connected via USB, BT
Access via Blue tooth:
After a connection to the 5054A has been set up, the Blue tooth software provides a virtual serial COM port (Blue tooth Serial Port
Profile). The Diagnostic Base System uses this COM port to communicate with the 5054A.You need to specify this port when you
install the diagnostic application.
Access Via USB:
You can also connect the 5054A to the application PC by using the supplied USB cable. Windows detects the 5054A through Plug and
Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the 5054A is then
complete and the device is ready for use by the diagnostic application.
2. Vehicle list:
5054A supports For Sea For Sko, Bent, Lamborghi.
3. Remote programming:
As for remote programming through software, you have to use 5054A or 5055 head.The 6154 cloned head only works with obdii
diagnostics and online programming.6154 clone and 5054A china clone share the same features:Both working with service 5.1.3
software
Why choose us?
1. Latest diagnostic and programming interface for the applications Service and Engineering, can replace the 5054A and 5055
2. Available for Off-board Diagnostic Information Engineering from V6.2 onward and Off-board Diagnostic Information Service from
V3.0.3 onward.
3. Support all for Skoda vehicles from 2000 onward including NEW & FUTURE MODLES under production.
4.Support WIFI & USB Connection:With wireless communication technology, can achieve wireless communic
– Estimated remaining times are shown for ECU flash operations.
– Diagnostic protocol contains interruptions of GFF sessions, extended measurement values, improved ECU communication view,used
diagnostic hardware, connection type of diagnostic hardware, operating system, the hotfix used and submissions of support requests
– The measured value display has been improved.
– Documents in GFF are displayed in separate windows.
– One message box will be shown at the beginning of the test drive mode.
– GFF hotfixes can be integrated during diagnostic sessions.
– Danger messages have been revised.
– Stopping of diagnostic sessions may be interrupted.
– Automatic deletion of autosave diagnostic protocols after successful transmission.
– Selection of PassThru diagnostic hardware has been improved.
– Service Software update has been stabilized.
Some questions about 5054A and 6154 ?
1. Connection method:
5054A: connected via USB, BT
Access via Blue tooth:
After a connection to the 5054A has been set up, the Blue tooth software provides a virtual serial COM port (Blue tooth Serial Port
Profile). The Diagnostic Base System uses this COM port to communicate with the 5054A.You need to specify this port when you
install the diagnostic application.
Access Via USB:
You can also connect the 5054A to the application PC by using the supplied USB cable. Windows detects the 5054A through Plug and
Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the 5054A is then
complete and the device is ready for use by the diagnostic application.
2. Vehicle list:
5054A supports For Sea For Sko, Bent, Lamborghi.
3. Remote programming:
As for remote programming through software, you have to use 5054A or 5055 head.The 6154 cloned head only works with obdii
diagnostics and online programming.6154 clone and 5054A china clone share the same features:Both working with service 5.1.3
software
Why choose us?
1. Latest diagnostic and programming interface for the applications Service and Engineering, can replace the 5054A and 5055
2. Available for Off-board Diagnostic Information Engineering from V6.2 onward and Off-board Diagnostic Information Service from
V3.0.3 onward.
3. Support all for Skoda vehicles from 2000 onward including NEW & FUTURE MODLES under production.
4.Support WIFI & USB Connection:With wireless communication technology, can achieve wireless communic
Recommend Products
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
