Epoxy Resin Raw Material for Industrial Epoxy Resin Liquid Glass Epoxy Resin The Raw Material From The Source Factory

 Epoxy Resin Raw Material for Industrial Epoxy Resin Liquid Glass Epoxy Resin The Raw Material From The Source Factory

Step 1: paint grinding on the ground, the ground clean, cannot have water on the ground, construction until completely dry can.

Step 2: the epoxy primer of A and B in proportion to 1:1 mix completely after mixing, use drum evenly on clean ground roll. 12 hours to completely dry before the next step of construction!

Step 3: Mix the epoxy batch/medium coating A and B components in a ratio of 5:1 together, after completely stirring, use a scraper to evenly scrape on the ground, a thin layer can be. 12 hours is completely dry before they can into the next phase of construction.

Step 4: the flat coating epoxy mix part A and part B according to the proportion of 4:1, fully stirring mixing, after using uniform roller roller coating on the ground. Paint construction completely dry need 12 hours. It can be used normally after completely drying.

Note: Please look at the label on each bucket! If the floor paint thickens and the construction is difficult, a small amount of diluent (10:1) can be added for dilution ~ The temperature below 0 degrees is not recommended for construction .

Epoxy Resin Raw Material for Industrial Epoxy Resin Liquid Glass Epoxy Resin The Raw Material From The Source Factory, 25KG /buckt.

Our factory has a highly experienced producing team,which maintains top level of every stage of the producing progress Give the customer one -stop purchasing service is our pursuit.  Main business  Dtf film,PET release film for screen printing and offset printing ,skateboard special film, ,flock film ,TPU film ,reflective film, screen printing ink ,DTF ink , hot melt powder ,hot melt adhesive,silicone ink etc.