Flier Factory Multirotor Drone UAV Plane 380A brushless ESC paramotor
US $108.00-$168.00
12V 70kg Xmaxx Crawler Robot Parts Brushless Digital Servo HV Large Torque Waterproof IPX8 Motor Steel Metal Gear RC Truck Car
- Category: >>>
- Supplier: Shenzhen Feite Model Co. Ltd.
Share on (1601221706951):
Product Overview
Description
Related Products
Control Specification
MODEL:FT870BL-C002
12V 70kg.cm Digital 180 degree Aluminium Case Steel Gear Brushless Motor Servo
Electrical Specification:Operating Voltage:12V\t\t\t\t
No Load Speed±10%：0.263sec/60°(70RPM)\t\t\t\t
Running Current ( no load)400mA\t\t\t\t
Stall Torque (at locked)：70kg.cm/973.8oz.in\t\t\t
Stall Current (at locked):5.2A\t\t\t\t
Idle Current (at stopped):26mA\t\t\t\t
Input Voltage Range:9V-12.6V\t\t\t\t
Rated Torgue:17.5kg.cm\t\t\t\t
Rated Current:1300mA\t\t\t\t
Kt constant:13.4kg.cm/A\t\t\t\t
Mechanical Specification：\t\t\t\t\t\t\t\t\t
Size:59X29X55mm\t\t\t
Limit Angle:No limit\t\t\t\t\t
Case material:Aluminum\t\t\t\t\t
Gear material:titanium alloy\t\t\t\t
Bearing type Ball bearings\t\t\t\t\t
Angle Sensor Type:Carbon-Film Potentiometer\t\t\t\t
Connector and Cable Type：JR\t\t\t\t
Material：PVC\t\t\t\t
Length：30±0.5CM\t\t\t\t
Pin Definition 1--Signal； 2---Vcc；3---GND。\t\t\t
The Weight：78.8g± 1g \t\t\t\t\t
Horn Type：25T/5.9mm\t\t\t\t\t
Gear Ratio：1/356\t\t\t\t\t
Back Lash\t≦0.5°\t\t\t\t\t
The rocker phantom：0°\t\t\t\t\t
The rocker screw：M3X6\t\t\t\t\t
Motor：4 Pole Brushless Motor\t\t \t\t
Control Specification：\t\t\t\t\t\t\t\t\t
Command Signal：Pulse width modulation \t\t\t\t
Control System Type：Digital comparator\t\t\t\t
Operating Travel：180±5°(at 500→2500μsec)\t\t\t\t
Left&Right Travelling Angledeviation≤ 5°\t\t\t\t
Centering Deviation\t≦1°\t\t\t\t
Neutral Position1500 μsec\t\t\t\t
Dead Band Width≤4 μsec\t\t\t\t
Rotating Direction ：Counterclockwise(在500→2500 μsec)\t\t\t\t
Pulse Width Range：500→2500 μsec\t\t\t\t
Electronic Protection：Stall 8sec，After the servo is blocked, the output torque exceeds
the overload torque and continues for more than 8 seconds
before automatically outputting the protection torque.
The overload torque, protection time, and protection torque can be modified. \t\t\t
\t\t\t\t\t\t\t\t\t
Reliability Testing\t\t\t\t\t\t\t\t\t
Life test＞100000 times,
Rotate forward at 60 degrees for 0.25S, stop for 0.5S, reverse at 60 degrees for 0.25S, stop for 0.5S once,
continuously cycle work, load 17kg - speed 0.526sec/60 °, test working voltage 12V. \t\t\t
The motor noises:50±5dB,Environmental noise 40-45 dB tested at a distance of 30cm from the noise meter\t\t\t\t\t
Steering gear noises:70±5dB,Environmental noise 40-45 dB,
tested at a distance of 30cm from the noise meter at -0.789sec/60 °, unloaded speed -12V\t\t\t
Waterproof performance:IP66\t
Product Description
Product Name | 12V 70kg.cm Digital 180 degree Aluminium Case titanium Gear Brushless Servo |
Material | Aluminium Case Steel Gear Core Motor |
Function | For 1:5 Traxxas arrma kraton baja RC Car Motor High Speed Servos |
Package | Seperate Colorbox with Metal servo horn and plastic accessory bag |
Product performance description
* Intelligent control: The servo digital servo hpi is equipped with an intelligent control panel, which can automatically adjust the temperature of the servo.
* Waterproof: The servo digital servo is waterproof, so you don't have to worry about getting wet while using it.
* Durable design: The servo digital servo hpi is made of high-quality aluminum alloy, which is durable and has a long service life.
* Waterproof: The servo digital servo is waterproof, so you don't have to worry about getting wet while using it.
* Durable design: The servo digital servo hpi is made of high-quality aluminum alloy, which is durable and has a long service life.
Product Usage
Packing&Shipping
Package included:
1 x Digital Servo
1 x 25T Metal Servo Arm
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No worry,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems.
3.If you receive a defect item,please contact us at once with item picture or video.
1 x Digital Servo
1 x 25T Metal Servo Arm
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No worry,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems.
3.If you receive a defect item,please contact us at once with item picture or video.
Company Introduction
Our Services & Strength
Shenzhen FEETECH RC Model Co., Ltd was established in 2011, We are a research and development, customization, production and sale of high-quality servos for artificial intelligence products company, Based on the realization of the servo transition curve constant acceleration technology and precision manufacturing technology, take hold in intelligent modular products which are more suitable for position control, The products are related to logistics, medical, education, AR industry, commercial robot and so on. It is committed to providing customized servo and industry solutions for enterprise users, and has been highly recognized and widely adopted by the partners. Since its development, Feetech has established a deep cooperative relationship with famous universities, Chinese Academy of Sciences, University of Hong Kong , and major emerging enterprises.
Feetech make arduous efforts to promote the artificial intelligence industry development .
The brand of “FEETECH” is
based on the concepts of Flying, Excellent, Efficient and Technology.
based on the concepts of Flying, Excellent, Efficient and Technology.
We look forward to working with you to build a better future together!
Specialized in ODM and OEM and Custom Made
Shipping
We adopt EXW term. Generally, we choose, DHL, FedEx, EMS or UPS as our forwarder. Of course, you can choose your own most favorable forwarder, and we would provide the freight bill according to the quantity and weight of the total products, Freight Collect can also be acceptable.
Payment
We adopt T/T payment methods. After we receive your payment, we will arrange shipment. All banking charges and interest are charged to purchasers.
Warranty Procedure
As long as you choose to use FEETECH products, you can enjoy the warranty service that we provide. Please print our Repair Request Form (.PDF, .DOC) and fill it out in its entirety, being as comprehensive as possible, in order to receive the best possible service.
Warranty Period
All FEETECH products are warranted against defects for a period of one (1) years from the date of purchase. During this period we
will repair or replace (at our discretion) any defective products. You should always retain your original receipt as proof of the date of purchase.
Shipping
We adopt EXW term. Generally, we choose, DHL, FedEx, EMS or UPS as our forwarder. Of course, you can choose your own most favorable forwarder, and we would provide the freight bill according to the quantity and weight of the total products, Freight Collect can also be acceptable.
Payment
We adopt T/T payment methods. After we receive your payment, we will arrange shipment. All banking charges and interest are charged to purchasers.
Warranty Procedure
As long as you choose to use FEETECH products, you can enjoy the warranty service that we provide. Please print our Repair Request Form (.PDF, .DOC) and fill it out in its entirety, being as comprehensive as possible, in order to receive the best possible service.
Warranty Period
All FEETECH products are warranted against defects for a period of one (1) years from the date of purchase. During this period we
will repair or replace (at our discretion) any defective products. You should always retain your original receipt as proof of the date of purchase.
Contact Us
FAQ
Q:How about your quality?
A:Our quality will be good,and the goods have been checked and tested one by one before shipping.
Q:How long for the delivery once we place order?
A:The lead time is declded the item you ordered and the quantity.
For normal order,the lead time is about in 5-7 days,
If big quantity or OEM,the lead time will be some days more.
Q:The price you are offering is with shipping costs included?
A:The price does not include the shipping cost.We offer several
shipping solutions,make sure customers choose the most economical one.
Q:Do you have After-Sales Service?
A:Of course,We have special department to do it,and if you have any technology
problem,our eingeer will give your answer.
A:Our quality will be good,and the goods have been checked and tested one by one before shipping.
Q:How long for the delivery once we place order?
A:The lead time is declded the item you ordered and the quantity.
For normal order,the lead time is about in 5-7 days,
If big quantity or OEM,the lead time will be some days more.
Q:The price you are offering is with shipping costs included?
A:The price does not include the shipping cost.We offer several
shipping solutions,make sure customers choose the most economical one.
Q:Do you have After-Sales Service?
A:Of course,We have special department to do it,and if you have any technology
problem,our eingeer will give your answer.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
