Non solidify rubber bitumen waterproofing coating/paint for shower //www.hbchaoda.com/
Our main catalogue: 1. Construction Waterproof Coating 2. Building Waterproof Membrane 3. Road Sealing Waterproof Materials 4. Telecom Power Tape(Insulation Tape, Waterproof Tape) 5. Butyl Rubber Sealing Clay
Product Description
Non-curing rubber modified bitumen waterproof coating is our company's new development and production of a new type of waterproof material. The material is one component waterproof coating that made by powder, polymer, asphalt and other materials through special modifier and annexing agent.After long-term exposure to air,non-cured rubberized asphalt waterproof coating don’t curing, insoluble in water, have high bond strength, able to adapt to the complex construction operation; it can automatically search for leaks parts repair damaged the waterproof layer, to keep permanent leak proof; doesn’t contain solvents, meet the requirements of national security, environmental protection.
It has outstanding creep properties, good waterproof performance, ageing resistance, can use daub, spraying and plasma, and other methods.It can use with coil to form composite waterproof layer;and can also be alone as a waterproof layer, surface should be attached to the isolation layer.
Characteristic:
1. Excellent creep properties
2. Excellent bonding performance
3. Excellent self-healing property
4. Excellent wet construction at the grass-roots level
5. Excellent resistance to chemical corrosion resistance and aging resistance
6. Superior environmental performance
Application:
industrial and civil building roof and side wall waterproof engineering
road bridges, railways and other waterproof engineering
dams, water conservancy facilities and other waterproof engineering
deformation cracks, settlement joint and other crack grouting filling and sewing
Technology Data:
Construction points :
1.Clean up the grass-roots
When the surface of the grass-roots levelobviously uneven is suitable to use cement mortar screeding; Through the pipeline of the waterproof layer, embedded parts and equipment foundation shall be buried before the waterproof layer construction and installation.The gaps between the pipeline and structure should plugging tightly of fine stone concrete or polymer waterproof mortar.Use a broom or hair drier to clean up grass-roots mortar and construction waste.Acceptance of the basic level should smooth, solid, drainage slope comply with the design requirements, grass-roots level can be wet but can not have water on the surface.
2.Detail parts additional layer construction
The place such as roof rainwater mouth, the roof tube root, the inside and exposed corner ofparapet and gutter firstlyblade coating 1mmnon-cured rubberized asphalt waterproof coating to make strengthen.
3.Coating construction
Coating can choose blade coating or spray coating construction, open extrusion pump, to squeeze non-cured rubberized asphalt waterproof coating to the grass-roots, blade coating evenly and full coating not exposed base, coating thickness according to the design requirements.
4.Pave coil
Then paving the coiled material to waterproof coating surface that has completed the construction , it should laid straight, smooth, no wrinkle.Coiled material lap width is 100 mm,overlapping parts adopt cold stick form, then blade coating or spray
coatingnon-cured rubberized asphalt waterproof coating on the coil lap width range, no need table dry time, can be directly construction overlapping parts of the coil, and rolling.
5.Water-storing test
After the completion of the waterproof layer, water storage experiment was carried out in accordance with the regulations.
Storage 24 hours no leakagewater is qualified.
6.The construction of protective layer
The quality of roofwaterproof layer can be qualified acceptance, protective layer construction can be going.According to
design requirements do the corresponding concrete, block material or cement mortar layer.
Transportation and storage :
To save the material in a dry indoor ventilation
To prevent the sun and rain and avoid collision in transportation
The shelf life of product is half a year, exceed the shelf life should re-inspection when qualified can be used
Products Show:
Our Services
Selling Points/Reasons for choosing us:
(1) Our warranty period is one year against the date of shipment.
(2) Free samples of semi-conductive adhesive tape are available for your closer checking.
(3) Well trained and experience sales manager to help you with any of your requirement.
(4) Professional R&D team, strong technical support.
(5) We have all specifications of our products and can meet customers’ product diversity needs.
(6) We prefer to accept your lower MOQ in order to relieve your purchasing stress.
(7)Our markets are widely distributed to North Europe, East Europe, West Europe, North America, South America, East Asia, Southeast Asia, Middle East, Australia, etc. and enjoy good reputation.
Our service:
(1)You can order online from us for 24 hours, 7 days.
(2)Our experienced staff answer all your questions in professional and fluent English.
(3)OEM&ODM products and customized design are available and welcomed.
(4)Our shipping team can make sure that our customers around the world receive the hundreds of orders shipped daily from our warehouse on time and as promised.
FAQ
1.Before placing order, can we make sample firstly?
Sample can be arranged to send to you to test before placing order. Sometimes sample is free ,sometimes sample charge should be included if more than 3 pcs with material. But we are afraid freight charge will be paid by yourself. Certainly, we will adjust additional sample and freight charges into your bulk order. 2.How can I get your sample? Of course, we can send you some samples. Most samples are free, but sometimes we will take small sample fees. Maybe you also send us your DHL or EMS/UPS/TNT etc account ,so you can pay for air freight to your carrier company directly. 3.Whether we can print our logo or need our color or size or not? Yes, because we have our own factory and R&D team, so we can make products as your demands. We can print your logo, we also can make as your size and print it as your color. 4.How many kinds of payment terms you can accept? About payment terms, we would like 100%TT if less than $1000.00 Usually for bulk order , would like can be paid pay 30%- 50% advanced payment and the rest should be paid before dispatch. We hope this information will be helpful to you, if you have any question, please feel free to contact us, we are always at your service.
