5.5HP gas motor liquid rubber roof coating for large area and corners only salle online

Portable airless sprayer is the use of a dedicated gasoline engine or electric motor for power, driven diaphragm pump fluid suction port, through the pump plunger reciprocates applied pressure to the set by a high pressure hose, spray gun, and finally through a special fan-shaped nozzle, the outer muzzle uniformly mixed into tiny particles, and rapidly breaking cross-linked film, sprayed onto the surface to form a uniform coating layer, to achieve the purpose of spraying.

Features

Currently, airless sprayer has been widely used, especially for large-scale, long-distance and narrow space spray. He mainly has the following characteristics:
1. As the liquid material is ejected under pressure against the surface of the concrete to make it closely, and can penetrate into the pores inside the concrete, so that the coating has good adhesion
2. a continuous multi-pass spraying thicker coating can be achieved, thereby reducing the number of spraying.
3. spray fan width up to 15mm-500mm range. Spray flow rate of 20 liters -30 liters / min, especially for large-scale construction, single gun spraying speeds up to 800 square meters-1500 square meters / day, high construction speed.
4. suitable for spraying thick coatings and high solid content coating composition, that is, saving manpower, improve the progress of construction period, but also reduce environmental pollution.
5.smart handling equipment, suitable for field construction operations, make construction easier and faster.

1. for industrial and civil buildings waterproof coating between the roofing, metal roofing, underground, ground floor, indoor toilet and bath, exterior waterproofing spray.
2.used in municipal engineering subways, tunnels, highways, bridges, pipelines ditch, fire, swimming pool, sewage treatment plants, landfills and other waterproof spray.
3.applicable to the petroleum pipeline industry fire safety requirements, natural gas outside of the tank corrosion protection spray.
4.applicable to the marine industry corrosion requirements of the ship, docks corrosion protection spray.
5. applicable to the nuclear power industry and water spray environmental requirements.

 (1)Clear grassroots floating dust, loose animals, all kinds of oil, through walls and reinforced steel tip protruding; on the concrete surface and exposed steel head polished smooth, be clean, clean, clean, Mingshui
Grassroots acceptance, an additional layer has been processed, that Omo spray construction, before spraying the test gun, according to the manufacturers claim A / B spray gun angle and output meet the design requirements, spraying to smooth vertical and horizontal cross, uniform and orderly when a thickness of 1.5mm continuous spray 4-5 times to cross;
(2) large-scale spraying need to wait until all of the additional layer film formation, continuous spraying each vertical cross over and spray process orderly, continuous operation, uniform film thickness, to meet the design requirements;
(3) quick-setting spray paint spray products are high-pressure fan spray at room temperature, the A and B components are mixed in proportion to the gun, the reaction, one sprayed on the surface, 3 ~ 5s to become film, forming a dense, continuous, seamless whole highly elastic rubber coating;
Large area spray
(4) Strengthening the detailed structure of the process or not sprayed at the site of construction, with the A-type material by brush, be applied by brush, mix coating or knife coating; when the need to increase the carcass reinforcement, sandwiched shop in the middle of the coating ;
(5) additional waterproof layer using quick-setting spraying brushing or spraying paint, additional waterproof coating thickness not less than 1.2mm;
(6) Construction of a protective layer sprayed quick-setting rubber asphalt waterproof outer layer made 3cm thick 1: 3 cement mortar

 Any more information please contact me as follows: