Антипригарное покрытие из ПТФЭ для алюминиевой сковороды, покрытие из ПТФЭ, светящаяся распылительная краска

Description

S-200 is particularly designed for baking operation, and features extraordinarily glossy surface, outstanding stain resistance, non-stick performance and superior scratch resistance. The surface is easy to clean after baking operation. It has a very good operability, it is workable at 200℃, can be widely applied on the inside coating of iron bakeware.

Type

Solvent based silicone resin

Key Features

l  High-gloss

l  Excellent heat resistant

l  Excellent chemical resistance and abrasive resistance

l  Excellent and lasting non-stick performance, easy to clean

Typical Properties

APPLICATION

l  Bakeware made of aluminum, stainless and carbon steel

Storage and Handling

l  Available in 20 kg/ barrel or 30 kg/ barrel

l  Store products in tightly closed original containers at 5-35℃

l  Shelf life: 6-9 months from delivery date

How to use

1.      Requirement on pre-treatment

l  Firstly, apply high-temperature degreasing, then wash with 1%~3% NaOH solution (60℃) for more than 6 minutes. Then dry it after water rinsing;

2.      Preparation of the coating

l  Dispersion of coating: the coating must be fully dispersed before operation by stirring;

l  Viscosity adjustment: the viscosity could be adjusted according to different spray methods. Dilute with special thinner if the viscosity is over high;

l  Coating filtration: filtrate the coating with screen (200-400 mesh) before using.

3.      Application

l  The spraying environment should be dry, well-ventilated, no smoking and fire;

l  Use electrostatic spraying and dry out the workpieces at 100-150℃;

l  Adjust atomization and oil pump capacity of spray gun. Make sure the unit it clean and level. Keep the thickness is within 15μm-20μm;

l  Dry the workpieces at 280℃ for 5-10min.