PT 710, 50mA to 100A 100KHz AC DC Pinteck Current Probe Oscilloscope

Product Overview

Description

AC/DC current probe PT-710 (current clamp)

 

Precision and phase shift	Range	100mV/A	10mV/A
	Current range	50mA~10A peak	1A~100A peak
	Output signal (percentage error)	3%±5mV	500m~40A peak:4% ±500uV:40~100A peak:100A(max.)15%
	Frequency range(-3dB)	DC~100kHz
	Phase shift	DC~65Hz:<1.5	DC~65Hz:<1°
	Load impedance	≥1MΩ and ≤100pF
	Insert impedance	0.01Ω
	Noise	6mV	600μV
	Slew Rate	0.3V/μS	20mV/μs
	Rise/fall time	3μs	4μs
	Measurement conditions:23ºC±5ºC,20~75%RH, Sinusoidal frequency :48~65Hz, External magnetic field <40A/m, no load flow, the center of the test sample, load impedance:1MΩ
Working voltage		600V CAT III
Common mode voltage		Max 600Vrms
Battery		9V Alkaline battery (meet up with: NEDA 1604A,IEC 6LR61)
Low battery indicator		>6.5V,LED is green
Overload indicator		Red LED means the measure current is too big and it need to change the measuring range
Mechanical index
Oper.Temp		0~+50 ºC
Preservation temperature		-3~+80ºC
Temperature effect		Per 10ºC,<0.2%
Operation relative humidity		+10ºC~+30ºC:85±5% elative humidity(non-condensing):+40ºC~+50ºC:45±5% elative humidity(non-condensing)
Operating height		0~2000m
Maximum EZhong insert		Dia.11.8mm
Dimension		231mm*36mm*67mm
Weight		330g(have cell)
Output		2 meters coaxial cable, terminal with insulation BNC connector jack