Manual welding laser engraving fume extractor

Product Overview

Description

Welder welding station fume extractor 

 

Features

 

1. Apply to all kinds of soot purifications caused by welding, grinding, as well as recycling of rare metals, precious        

    materials, etc.

 

2. For the potential of fire and molten slag particles, two protective measures are used inside purifier, to make it a

    longer life, more secure and reliable.

 

 

3. Power phase sequence instructions,  short-circuit protection for lack of phase, with shutdown protection

    measures when too high temperature.

 

4. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-

    resistant compounded materials, without crack and damage to sparks, its life shorter than the model of

    intelligent.

 

5.Suction arm can be rotated 360 °, and reach the point of destination and angle of inhale dust and air by pulling

   the handle of the hood with the operator’s will flexibly and easily and position by itself in the absence of external

   force. Depending on needs, 2m, 3m or 4m flexible suction arm are optional.

 

6. Suction arm uses real temperature-resistant, flame retardant and wear-resistant composite materials, and will

    not crack after burning through by spark with longer life; the arm diameter is160mm.

 

 

On the control panel, it displays.

--Fan Switch

 

Model	KSJ-0.7S	KSJ-2.2S
Treatment of air flow	1000 m3/h	2000 m3/h
Motor Power	0.75 kW	2.2kW
Voltage	1×220 V/50 Hz	1×220 V/50 Hz
Filtering area	15 m2	30m2
Cleaning Methods	Semi-automatic Cleaning or manual handing	Semi-automatic reverse blowing or Manual handling
Compressed Air	0.5~0.6 MPa	0.5-0.6 Mpa
Filtration efficiency	>99.9%	>99.9%
Numbers of supporting cantilevers	1 pc φ160mm length 2.0 m	2 pcs φ160mm length 2.0 m
Noise	≤74±5dB(A)	≤74±5dB(A)
Demission	510×610×990mm	640×760×1320mm
Weight	98±5 Kg	135±5 Kg