Completely oil filter system machine 1/2/3/4/5/6/7 stage stainless steel cartridge water filter housing with filter cartridge. Movable filter is composed of prefilter, oil pump and filtration unit, prefilter for a metal netting,
to prevent the large solid into the pump, oil pump is usually gear pump, to convey the unpurified
oil into the filtration device.The filter device is a small manual compression plate and frame filter press,
using special filter paper as a filter medium. Under the oil pump pressure help, the unpurified oil into the
plate & frame filter press, it will be a pure filter oil after it throughs the filter paper. The solid impurities trapped
in the filter paper surface, a small amount of water is absorbed by the wool stoma of filter paper.The filtration
pressure is normal not over 0.3MPa, when there is too much deposition impurity on the filter paper surface,
the filter pressure is increased to 0.35 MPa, or when the moisture of filter paper absorption is close to saturation
state, residual moisture in the oil filter no longer falls, it should be replaced the filter paper. When the oil has a
high viscosity,it can be preheating again, in order to reduce the viscosity for reusing.This kind of oil filter machine
can remove the solid impurities and a small amount of water, it is suitable for the general electric oil and
lubricating oil refining.
Hand cart model single/dual bags 304 316L stainless steel bag filter machine with liquid oil bag filter 10 microns 7x32 inch
1/2/3/4/5/6/7/8 stage, or customized.
Filter elements type
Filter cartridges, Filter bags.
Inlet & Outlet
1 microns to 100 microns available.
Liquid flow type
Side Entry; Top Entry.
0.5℉ to 380℉
100psi to 235psi
Housing design pressure
Air/liquid pump, booster pump, wheel pump, air pump, pneumatic pump, etc.
7 ~ 15 working days
Movable cart type
filter machine spec.
The configurations only for reference, it is depended on different customers' requirement.1.SS filter housing
11.Electrical apparatus & elements
Filtration area (m²)
Bag diameter (mm)
Inlet & outlet size is 1/2", 3/4", 1 inch, easy installation.
Working pressure 8kg/0.8Mpa is supported.
Use the tap water pressure to provide power, no power consumption.
This is suitable for using in the water master switch, for the pre filtration system and RO system protection.
Resistance to strong acid and alkali.
Low cost, it fits different kind of filter elements.
In & Out
1" & 2"
1" & 2"
1" & 2"
1" & 2"
In & Out
In & Out
1.It can be widely used in UF, RO, EDI security filtration and end- filtration, medicine injection, large infusion, eye drops,.
2. Chinese herbal medicine, such as liquid filtration, biological agents extraction, purification and concentration.
3. Electronics, semiconductor industry with high purity water preliminary filter, terminal filter.
4. Oil field back to water injection, boiler makeup water, chemical reagent, liquid organic products, high purity chemicals, strong medicine and other filtration.
5. Drinking pure water, mineral water, fruit juice, tea beverages, health drinks filtering.
6. Liquor, wine, beer, yellow wine and other fruit wine filtration, pure draft beer aseptic filtration (alternative pasteurized)
7. The life and production waste water treatment and water recycling process of pre-treatment filtering or security filtering.
8. Biological engineering, oil refining, printing and dyeing, textile industry water supply and waste water treatment, research and test filter, etc.
RO WATER TREATMENT
BOTTLED MINERAL WATER
SEA WATER DESALINATION
FOOD & BEVERAGE
Ms. Vickie Yung
Mob./Whatsapp/Wechat: +86 15975359293
We can provide customized services to meet different customers' filter systems demand, pls kindly to send us your inquiry and tell us your requirement. Thanks~